The AL3100 is a Commercial/Industrial wall mounted (or table-top) breath alcohol tester with 3-digit LED display of %BAC that provides continuous free testing throughout the workplace. The AL3100 uses an advanced semiconductor sensor to detect the presense of alcohol. For convenience, it also uses Pre-Calibrated Replaceable Sensor Modules to eliminate the need for calibration and can be switched on site. The sensor module should be replaced approximately once every 500 tests.
Indication of BAC%
0.00 to 4.00% to 2.00mg/l BAC or 0.00 to 0.40% BAC
Warm up time
Within 25 seconds
Response time
Within 3 seconds
Sensor type
Semiconductor type alcohol sensor (user replacable).
Mouthpiece
Cylindrical straw (normal straws can also be used).
Power supply
AC110 – 220 volt input
Accuracy
+/- 0.01% BAC
Weight
4.5kg
Unit Size
240 / 130 / 260 (mm)
Printer size
119 / 89 / 130 (mm)
Audible warnings
3 steps beep warning of alcohol detection with LED display
Auto power off
Standard
Calibration
Sensor module exchange every 6 months or 500 tests (user swappable)
