Header Graphic
Don't Get Caught Members > ALPriority Firmware Update!
ALPriority Firmware Update!

Oct 22, 2014

ALP Firmware Version 4.4.2/5.2 released on 22/10/2014.

Have you updated to latest ALPConnect?
Please check version 1.7 of ALPConnect (https://itunes.apple.com/au/app/alpconnect/id694278885?mt=8) in iTunes released October 8th.

Get the Update (http://www.alpupdate.com/Firmware)
What if you can not find the serial number of your system?
You may store details from your AL Priority to external USB flash drive and read all information about your system HERE (http://www.alpupdate.com/Statistics).

Here's what's new in this firmware release:
1. Improved Error signalization.
2. Improved and expanded various LIDAR routines.
3. Blue Menu adapted

Oh my, what is a Blue Menu?
After you have firmware extended your system to the latest firmware some options can be changed manually over a basic Control Set inside the Blue Menu.

Press MENU and hold as long as LED light turns from Yellow to Blue and you can manually change these blue-menu options:

1. PDC/DLI/LID option setup
Press MENU/Next once (1) when in a blue menu, then press Enter (LED will turn white when you enter submenu)
Press MENU/Next once, twice, three, four, five, six, seven, eight or nine times depending on your preference (choose below) then press Enter to activate.
1 – for Parking detection only
2 – for PDC&DLI detection only
3 – for 3 seconds LID defense
4 – for 4 seconds LID defense
5, 6, 7, 8,
9 – for 9 seconds LID defense

2. PDC disable
Press MENU/Next twice (2) when in a blue menu, then press Enter to enable/disable parking detection (PDC)

3. PRO MODE
Press MENU/Next 3 times when in a blue menu, then press Enter to enable/disable PRO MODE
In Pro Mode LED is blinking during LID alert only when being targeted.

4. SKIP WARM-UP
Press MENU/Next 4 times when in a blue menu, then press Enter to enable/disable Skip first warm up

Online setup
To create your new setup file click here and Select your Region: SETUP (http://www.alpupdate.com/Setup)

And here's what was introduced in previous firmware upgrade. Constant LED light may be configured manually over your Control Set: Status LED option
1. Power on your ALP
2. Long press MENU button to enter MENU (LED will turn yellow)
3. Press MENU/NEXT three (3) times then ENTER (LED will turn white)
4. Press MENU/NEXT once, twice, three, four, five or six times depending on your preference (see below)
1 - Normal-Blinking;
2 - Dimmed-Blinking;
3 - Dark-Blinking;
4 - Constant;
5 - Constant-Dimmed - TRY THIS OUT!
6 - Constant-Dark
5. and press ENTER to confirm
6. System will exit the Menu in a few seconds of being inactive.

Check out these new videos and reviews...
ALP with a display and a voice on your iDevice ALPConnect Video Review by Mirage (http://www.youtube.com/watch?v=knY1N4Y-brM&list=PLuCyrSv1GWrzjUNSAM6pkQ7D5QRBBkEfQ&index=3).

Find more ALP Videos HERE (http://www.youtube.com/playlist?list=PLuCyrSv1GWrzjUNSAM6pkQ7D5QRBBkEfQ).

© Copyright DGC 2024
ABN:  87 528 875 816